TM-9-2815-220-24 Maintenance Manual for AVDS-1790-2CA AVDS-1790-DA and AVDS-1790-2DR Engines Download
Page 1384 of 1563
TM 9-2815-220-24 FUEL INJECTION ADVANCE CONTROL REPAIR 0161 00 INSPECTION All parts must be inspected with care. Replace parts if damage or wear exceeds allowable limits. 1. See Work Package 0028 for General Inspection Procedures. 2. Visually inspect spring retainers (18) and seats (19) for cracks, indentations or other damage. Replace any damaged parts. 3. Springs (24) are mandatory replacement items. Replace with new springs (item 242.1, WP 0175) that conform to free length (A) and compressed length (B) in the following table. Location Sizes and Fit of New Parts inches (mm) Wear Limits A (Free length) 1.6300 (41.402) approximate None B (Compressed length) 0.6510 (16.5354) maximum None Scale reading at 1.03 inch (26.162 mm) 12.3 pounds 14.9 pounds None B A 19 18 17 25 WP 0161 00-8