TM-9-2815-220-24 Maintenance Manual for AVDS-1790-2CA AVDS-1790-DA and AVDS-1790-2DR Engines Download
Page 1382 of 1563
TM 9-2815-220-24 FUEL INJECTION ADVANCE CONTROL REPAIR 0161 00 DISASSEMBLY (Continued) 11. Remove cover (7) from bevel gear shaft (27). CAUTION An internal retaining ring (28) secures cover (7) to the bevel gear shaft (27). Follow the procedure carefully to remove the cover. Improper procedure can cause damage to the cover or the shaft. a. Cut four pins (29) 7/16-inch (approximately) long from 7/32-inch diameter brass brazing rod or other soft material. b. Insert the pins (29) in the four equally spaced holes in bearing portion of cover (7). c. Install fabricated ring compressing tool (30) (item 1, WP 0177) over the pins. d. Tighten bolts (31) sufficiently to compress the cover (7) internal retaining ring (28). e. Install bevel gear shaft (27) in a soft jawed vise and, using a gear puller (item 85 WP 0176), remove cover (7). f. Remove and discard retaining ring (28) from bevel gear shaft (27). 31 7 30 29 (four places) 28 27 31 WP 0161 00-6