TM-9-2815-220-24 Maintenance Manual for AVDS-1790-2CA AVDS-1790-DA and AVDS-1790-2DR Engines Download
Page 1381 of 1563
TM 9-2815-220-24 FUEL INJECTION ADVANCE CONTROL REPAIR 0161 00 DISASSEMBLY (Continued) CAUTION Do not use a prying device to separate housings. Damage to machined surfaces may occur. 7. Separate flyweight housing (15) from vane housing (21). a. Note the location of dowel pins (22) in vane housing (21) for alignment with holes in flyweight housing (15) during assembly. 21 22 15 8. Separate vane housing (21) from cover (7) noting the location of dowel pins (23) for alignment with holes in cover (7) during assembly. 9. Partially separate vane (24) from housing (21) and remove eight springs (25) and eight seals (26). Discard springs and seals. 10. Remove vane (24) from housing (21). 2 24 5 26 7 21 23 WP 0161 00-5