TM-9-2815-220-24 Maintenance Manual for AVDS-1790-2CA AVDS-1790-DA and AVDS-1790-2DR Engines Download
Page 1335 of 1563
TM 9-2815-220-24 STARTER DRIVE MECHANISM REPAIR 0157 00 REMOVAL (Continued) 2. Remove spur gear (5) (Continued): b. Install three 5/16-24 X 3-inch bolts (8) (item 12, WP 0176), for use as puller screws, into threaded holes provided in spur gear (5). c. Alternately tighten bolts (8) to pull spur gear (5) from spur gear shaft (7). d. Remove three puller screws (8) from spur gear (5). 3. Remove idler spur gear (9). a. Cut and remove locking wire (10) and remove two slotted nuts (11) securing idler shaft (12). b. Attach mechanical adapter (13) (item 2, WP 0176) and slide hammer puller (14) (item 88, WP 0176) to idler shaft (12). c. Support idler gear (9) while using slide hammer puller (14) to remove idler shaft (12). d. Remove O-ring (15) from idler shaft (12). Discard O-ring. e. Remove slide hammer puller (14) and adapter (13) from idler shaft (12). 8 10 14 15 12 13 11 9 7 5 WP 0157 00-3