TM-9-2815-220-24 Maintenance Manual for AVDS-1790-2CA AVDS-1790-DA and AVDS-1790-2DR Engines Download
Page 1290 of 1563
TM 9-2815-220-24 OIL PUMP REPLACEMENT 0153 00 REMOVAL 1. Remove and discard gasket (1) from leveling transfer tube (2). 2. Remove transfer tube (2). a. Remove two self-locking nuts (3) and two screws (4). Discard self-locking nuts (3). b. Disengage and remove transfer tube (2) from hole in baffle (5) and from opening in oil pump (6). c. Remove and discard O-ring (7). 5 7 1 2 3 6 4 NOTE Older engines had lock wire securing screws that fasten the pump to the crankcase. Lock wire is no longer required in this location. However, lock wire is still used on the two screws securing support bracket. WP 0153 00-2 Lock wire no longer used here Lock wire used here Support Bracket