TM-9-2815-220-24 Maintenance Manual for AVDS-1790-2CA AVDS-1790-DA and AVDS-1790-2DR Engines Download
Page 1287 of 1563
TM 9-2815-220-24 OIL PAN ASSEMBLY REPLACE/REPAIR 0152 00 INSTALLATION (Continued) 1. Install oil pan. (Continued) c. Attach sling assembly (10) (For 2CA/2DA, item 38, WP 0176) (For 2DR, item 37, WP 0176) to engine (11) lifting eyes (12) and to a suitable lifting device. d. Take slack out of lifting device and remove four screws (13) and four flat washers (14) securing engine to rollover stand (15). e. Lift engine (11) from maintenance stand (15) and carefully lower onto the oil pan (1). f. Install two new self-locking nuts (8) (item 34, WP 0175) with flat washers (9) (one on each side of pan, near the center) to secure oil pan (1) to engine (11). g. Mount engine (11) onto maintenance stand (15) (item 111, WP 0176). (1) Secure engine (11) to maintenance stand (15) with four screws (10) and four flat washers (11). h. Remove sling assembly (10). i. Install 27 new self-locking nuts (8) (item 34, WP 0175) with flat washers (9) on each side of oil pan (1). j. Alternately tighten 56 new self-locking nuts (8) to 275-300 inch pounds (31-33.9 N•m). 11 15 13,14 12 10 8,9 WP 0152 00-11