TM-9-2815-220-24 Maintenance Manual for AVDS-1790-2CA AVDS-1790-DA and AVDS-1790-2DR Engines Download
Page 1274 of 1563
TM 9-2815-220-24 DAMPER/OIL FILTER HOUSING ASSEMBLY REPLACE/REPAIR 0151 00 INSTALLATION (Continued) 1. Install damper/oil filter housing (1) (Continued): c. Apply a 1/16- to 1/8-inch bead of sealant (item 33, WP 0173) at the split line (A) and the mating surfaces of the damper housing (1) and the crankcase assembly (40). d. Attach suitable lifting sling (item 105, WP 0176) and hoist to lifting eyes (7). WARNING Damper/oil filter housing is heavy, use suitable lifting device. Take care that damper/oil filter housing does not swing on hoist and injure personnel. CAUTION Do not allow damper/oil filter housing to rest on studs while housing is separated from crankcase and oil transfer tubes. Caution must be taken to prevent damage to machined surfaces on the oil pan, crankcase parting line, and the damper/oil filter housing. e. Lift damper/oil filter housing (1) just enough to clear oil pan (4) and carefully slide into position. 4 40 A A WP 0151 00-12