TM-9-2815-220-24 Maintenance Manual for AVDS-1790-2CA AVDS-1790-DA and AVDS-1790-2DR Engines Download
Page 1264 of 1563
TM 9-2815-220-24 DAMPER/OIL FILTER HOUSING ASSEMBLY REPLACE/REPAIR 0151 00 REMOVAL 1. Remove damper/oil filter housing (1). a. Remove 12 screws (2) with flat washers (3) securing damper/oil filter housing (1) to oil pan (4). b. Remove self-locking nuts (5) with flat washers (6). Discard self-locking nuts. 1 2 3 4 c. Attach suitable lifting sling and hoist to lifting eyes (7). WARNING Damper/oil filter housing is heavy, use suitable lifting device. Take care that damper/oil filter housing does not swing on hoist and injure personnel. CAUTION Do not allow damper/oil filter housing to rest on studs after housing is separated from crankcase and oil transfer tubes. Caution must be taken to prevent damage to machined surfaces on the oil pan, crankcase parting line, and the damper/oil filter housing. d. With a slight amount of lifting pressure from hoist, carefully remove the damper/oil filter housing (1). 7 5 (fourteen places) 6 7 1 WP 0151 00-2