Sign up to sell your inventory with NSN Lookup

TM-9-2815-220-24 Maintenance Manual for AVDS-1790-2CA AVDS-1790-DA and AVDS-1790-2DR Engines Download

Page 1253 of 1563

TM 9-2815-220-24 CAMSHAFT ASSEMBLY, LEFT BANK, REPAIR 0149 00 INSPECTION (Continued) 3. Check camshaft (6) run-out (straightness of camshaft). a. Position camshaft with end journals on V-blocks (item 131, WP 0176). b. Using dial indicator, measure run-out of center journal (full indicator readout). c. Reject camshaft if run-out exceeds 0.015-inches (0.381-mm). 6 4. Measure lift of camshaft (6) lobes (A). a. Zero dial indicator on base circle of lobe. b. Rotate camshaft to reach maximum lift. c. Reject camshaft if any lobe does not attain a lift of 0.4140 inch (10.5156 mm). 6 A (12 places) WP 0149 00-3