TM-9-2815-220-24 Maintenance Manual for AVDS-1790-2CA AVDS-1790-DA and AVDS-1790-2DR Engines Download

Page 1247 of 1563

TM 9-2815-220-24 CAMSHAFT DRIVE ADAPTER REPAIR 0147 00 THIS WORK PACKAGE COVERS: Inspection, Repair INITIAL SETUP: Tools and Special Tools: General mechanic’s tool kit (item 121, WP 0176) Outside micrometer caliper set (item 17, WP 0176) Personnel Requirements: Track Vehicle Repairer (1) 63H10 Equipment Conditions: Engine on maintenance stand (WP 0130) Camshaft, drive gears, and associated parts removed (WP 0146) INSPECTION NOTE Left and right camshaft drive adapters are the same and have the same part number. 1. Inspect adapter (1) for cracks or damage. Refer to WP 0028. 2. Inspect oil transfer tube (2) and screw thread inserts (3). Refer to WP 0028. 3. Measure inside diameter (4) of bore in adapter (1) against the following limits. Point of Measurement Sizes and Fits of New Parts inches (mm) Wear Limits A (Inside diameter of bore as shown) 1.6250 (41.275) 1.6260 (41.3004) 1.6270 (41.3258) 3 1 2 A WP 0147 00-1