TM-9-2815-220-24 Maintenance Manual for AVDS-1790-2CA AVDS-1790-DA and AVDS-1790-2DR Engines Download
Page 1242 of 1563
TM 9-2815-220-24 CAMSHAFT, DRIVE GEARS, AND ASSOCIATED PARTS REPLACEMENT 0146 00 INSPECTION (Continued) 8. Perform "Installed" checks of bearing halves (33) (Continued). d. Measure inside diameter (A) of installed bearing halves (33). (1) Replace bearing halves (33) if not within the following limits. Location Sizes and Fits of New Parts inches (mm) Wear Limits A (Installed bearing diameter) 1.3115 (33.3121) 1.3135 (33.3629) 1.3140 (33.3756) Fit of bearing halves to camshaft journal 0.0015L (0.0381L) 0.0045L (0.1143L) 0.0055L (0.1397L) e. Remove rocker cover (35) and bearing halves (33). f. Inspect bearing halves (33) for Prussian blue transfer, and replace bearing sleeves that do not make at least 75 per cent contact. g. Repeat procedure if any bearing half (33) is replaced. 35 35 33 A WP 0146 00-10