TM-9-2815-220-24 Maintenance Manual for AVDS-1790-2CA AVDS-1790-DA and AVDS-1790-2DR Engines Download

Page 1213 of 1563

TM 9-2815-220-24 CONNECTING ROD ASSEMBLY REPAIR 0143 00 DISASSEMBLY (Continued) NOTE Connecting rods and caps are stamped with a location number on the side of one of the bosses. For example, "1R" would identify connecting rod and cap for number one cylinder on the right bank. Identifying serial numbers are located on the side opposite of the cylinder location numbers. 2. Identify bearing (5) location. a. Mark the two bearing halves (5) with a grease pencil or suitable marker to indicate their location. For example, the connecting rod bearing half (A) for cylinder "1R" should be marked "1RR" {1 right rod} and the cap bearing half (B) should be marked "1RC" {1 right cap}. NOTE If connecting rod (1) or cap (4) markings are obliterated, stamp connecting rods and caps so that they can be installed in their original positions. 5-B 5-A 4 1 WP 0143 00-3