TM-9-2815-220-24 Maintenance Manual for AVDS-1790-2CA AVDS-1790-DA and AVDS-1790-2DR Engines Download
Page 1193 of 1563
TM 9-2815-220-24 ACCESSORY DRIVE GEAR REPLACEMENT 0141 00 THIS WORK PACKAGE COVERS: Removal, Cleaning, Inspection, and Installation INITIAL SETUP: Tools and Special Tools: General mechanic’s tool kit (item 121, WP 0176) Inside micrometer caliper set (item 16, WP 0176) Outside micrometer caliper set (item 17, WP 0176) Torque wrench, 0-175 ft-lb (item 127, WP 0176) Wire twisting pliers (item 82, WP 0176) Expendable Materials: Lubriplate (item 23, WP 0173) Sealing compound, silicone sealant (RTV) (item 33, WP 0173) Wire, non-electrical (item 44, WP 0173) Personnel Requirements: Track Vehicle Repairer (1) 63H10 Equipment Conditions: Engine on maintenance stand (WP 0130) Crankcase/Transmission adapter assembly removed (WP 0131) Oil seal housing assembly removed (WP 0136) Oil pan assembly removed (WP 0152) 2CA, 2DA: Flywheel removed (WP 0102) 2DR: Flywheel and Adapter removed (WP 0103) 2DR: Transmission Spacer Ring removed (WP 0101) REMOVAL 1. Remove oil seal housing support (1). a. Remove four screws (2) with flat washers (3) attaching housing support (1) to crankcase (4). 4 3 2 1 WP 0141 00-1