TM-9-2815-220-24 Maintenance Manual for AVDS-1790-2CA AVDS-1790-DA and AVDS-1790-2DR Engines Download
Page 1188 of 1563
TM 9-2815-220-24 CRANKSHAFT DAMPER REPAIR 0140 00 REMOVAL (Continued) 1. Remove vibration damper. a. Position crankshaft and damper (1) so that one mounting bolthole is at the 12 o'clock position and dowel pin (2) hole (A) is at approximately the 7 o'clock position. b. Insert tapered bolt (3) (item 16 WP 0177) in bolt hole at the 12 o'clock position. c. Install three mechanical pullers (4) (item 77, WP 0170) into screw holes provided in vibration damper (1). d. Alternately tighten pullers (4) to pull damper (1) from dowel pin (2) in flange of crankshaft just until damper (1) is free of dowel (2) in crankshaft flange and resting on tapered bolt (3). e. Remove mechanical pullers (4). f. Insert lifting strap through center of damper (1) and attach to suitable lifting device. g. Lift just enough to relieve load on tapered bolt (3) and slide damper (1) free of bolt. A 2 3 4 1 WP 0140 00-2