TM-9-2815-220-24 Maintenance Manual for AVDS-1790-2CA AVDS-1790-DA and AVDS-1790-2DR Engines Download
Page 1173 of 1563
TM 9-2815-220-24 CRANKSHAFT REPLACE/REPAIR 0139 00 INSPECTION (Continued) 3. Check dowel pins (16, 26). a. Insure that dowel pins (16, 26) are secure in crankshaft flanges, are not out of round, and are not bent. b. Measure diameter of (two) dowel pins (16). Mark for repair if not within specifications in the following table. Outside Diameter of Dowel Pins (Flywheel End) Minimum Maximum Standard 0.6255 0.6257 0.005 oversize 0.6305 0.6307 0.010 oversize 0.6355 0.6357 c. Measure diameter of dowel pin (26). Mark for repair if not within specifications in the following table. Outside Diameter of Dowel Pin (Damper End) Minimum Maximum Standard 0.5001 0.5003 16 26 WP 0139 00-11