TM-9-2815-220-24 Maintenance Manual for AVDS-1790-2CA AVDS-1790-DA and AVDS-1790-2DR Engines Download
Page 1138 of 1563
TM 9-2815-220-24 OIL SEAL HOUSING ASSEMBLY AND ASSOCIATED PARTS REPLACEMENT 0136 00 INSTALLATION (Continued) 12 A 13 1. Install oil seal (12) (item 365, WP 0175) onto crankshaft (13) (continued). e. Apply silicone compound (item 34, WP 0173) to outside of split oil seal (12). f. Apply a coating of silicone compound (item 34, WP 0173) around lip and outer surface of oil seal (12). g. Make sure that ends (A) of oil seal (12) join approximately 30 degrees from centerline of crankshaft (13). 2. Install new gasket (11) (item 348, WP 0175). 3. Install housing (4) and cap (3). a. Apply a 1/4-inch bead of sealant (item 33, WP 0173) to oil seal housing (4) where it mates with oil seal cap (3). b. Install oil seal housing (4) and cap (3) over crankshaft seal (12) and onto dowel pins (10). c. Slide housing (4), cap (3), and seal (12) as an assembly onto dowel pins (9). 10 3 9 4 11 12 9 WP 0136 00-6