TM-9-2815-220-24 Maintenance Manual for AVDS-1790-2CA AVDS-1790-DA and AVDS-1790-2DR Engines Download
Page 1111 of 1563
TM 9-2815-220-24 CYLINDER ASSEMBLY REPLACEMENT 0133 00 INSTALLATION (Continued) 7. Position piston (6) in cylinder (1) so that piston pin (10) is just outside of cylinder as shown. a. Remove one piston pin (10) retaining ring (11). b. Remove piston pin (10) from piston (6) while piston is still in cylinder. c. Using suitable lifting device, place piston (6) and cylinder (1) over connecting rod (9). d. Insert piston pin (10) through connecting rod (9) and piston (6). e. Secure piston pin (10) with retaining ring (11) assuring that retaining ring at opposite end of piston pin is in place. f. Lower cylinder (1) over piston (6) and onto crankcase studs (5). g. Temporarily secure with two base nuts (2) positioned approximately 180 degrees apart. 6 1 10 2 9 11 5 WP 0133 00-11