TM-9-2815-220-24 Maintenance Manual for AVDS-1790-2CA AVDS-1790-DA and AVDS-1790-2DR Engines Download
Page 1101 of 1563
TM 9-2815-220-24 CYLINDER ASSEMBLY REPLACEMENT 0133 00 THIS WORK PACKAGE COVERS: Removal, Cleaning, Inspection, and Installation INITIAL SETUP: Tools and Special Tools: Box wrench (item 32, WP 0176) Chain lift assembly (item 18, WP 0176) Crankcase protectors (item 25, WP 0176) General mechanic’s tool kit (item 121, WP 0176) Piston ring compressor (item 21, 22, 23, WP 0176) Retaining ring pliers (item 81, WP 0176) Torque wrench, 0-175 foot-pounds (item 127, WP 0176) Torque wrench adapter (item 4, WP 0176) Torque wrench adapter (item 5, WP 0176) Splined wrench, For Model 2CA or 2DA: (item 136, WP 0176) (Flywheel turning tool) Fabricated Tools: For Model 2DR: Engine front turning tool (item 3, WP 0177), or Engine flywheel turning tool (item 4, WP 0177) Mandatory Replacement Parts: O-ring (item 79, WP 0175) Expendable Materials: Lubricating oil (preservation oil) (item 21, WP 0173) Personnel Required: Track Vehicle Repairer (2) 63H10 Equipment Conditions: Engine on maintenance stand (WP 0130) Camshaft assembly removed For left bank (WP 0149) For right bank (WP 0150) Exhaust manifolds removed (WP 0107) Intake manifold assembly removed (WP 0108) Cylinder deflectors and shrouds removed (WP 0127) REMOVAL NOTE Single or multiple cylinder assemblies can be removed from each bank. If cylinder assemblies only need to be removed from one bank, major assemblies can be removed from just one bank. 1 1. Rotate maintenance stand so that cylinders (1) are horizontal. WP 0133 00-1