TM-9-2815-220-24 Maintenance Manual for AVDS-1790-2CA AVDS-1790-DA and AVDS-1790-2DR Engines Download
Page 1099 of 1563
TM 9-2815-220-24 FRONT LIFTING EYES AND GUIDES REPLACEMENT 0132 00 INSTALLATION 1. Install left installation guide bar (1) and lifting eye (2). a. Place new gasket (7) (item 182, WP 0175) and lifting eye (2) over studs on left side of damper housing as illustrated. b. Put left installation guide bar (1) in place and secure on lower studs with two new self- locking nuts (5) (item 34, WP 0175) using flat washers (6). c. Put cushioned clamp (4) securing fuel return hose in place and secure with four new self- locking nuts (3) (item 140, WP 0175). 2. Install right installation guide bar (8), lifting eye (2) and hour meter (9). a. Put lifting eye (2) in place on right side of damper housing. b. Put hour meter (9) in place on damper housing. c. Put right installation guide bar (8) in place and secure with two new self-locking nuts (5) (item 34, WP 0175) using two flat washers (6) at lower end of installation guide bar. d. Secure top end of installation guide (8) bar with four new self-locking nuts (3) (item 140, WP 0175). e. Connect hour meter (9) electrical connector (10). WP 0132 00-3 (4 blank) END OF WORK PACKAGE 8 5 6 3 9 3 10 2 7 3 1 6 2 4 3 2DR spacer plate: used in place of installation guide bar. 5