TM-9-2815-220-24 Maintenance Manual for AVDS-1790-2CA AVDS-1790-DA and AVDS-1790-2DR Engines Download
Page 1098 of 1563
TM 9-2815-220-24 FRONT LIFTING EYES AND GUIDES REPLACEMENT 0132 00 REMOVAL (Continued) 1. Remove left installation guide bar (1) and lifting eye (2). a. Remove and discard four self-locking nuts (3). b. Remove cushioned clamp (4) securing fuel return hose. c. Remove and discard two self-locking nuts (5). d. Remove two flat washers (6) then remove left installation guide bar (1). Retain flat washers (6) for installation. e. Remove lifting eye (2) and gasket (7) from left side of damper housing. Discard gasket (7). 2. Remove right installation guide bar (8), lifting eye (2) and hour meter (9). a. Disconnect hour meter (9) electrical connector (10). b. Remove and discard four self-locking nuts (3). c. Remove and discard two self-locking nuts (5). d. Remove two flat washers (6) and right installation guide bar (8). Retain flat washers (6) for installation. e. Remove hour meter (9). f. Remove lifting eye (2) from right side of damper housing. WP 0132 00-2 8 5 6 3 9 3 10 2 7 3 1 6 2 4 3 2DR spacer plate: used in place of installation guide bar. 5