TM-9-2815-220-24 Maintenance Manual for AVDS-1790-2CA AVDS-1790-DA and AVDS-1790-2DR Engines Download
Page 1079 of 1563
TM 9-2815-220-24 FAN DRIVE CLUTCH ASSEMBLY AND ASSOCIATED PARTS REPLACE/REPAIR 0129 00 ASSEMBLY (Continued) 7. Lubricate four clutch disks (38, 39) with lubricating oil (item 21, WP 01073). 8. Install four clutch disks (38, 39) in fan drive hub assembly (32) in the order shown. 9. Install flange (31) over clutch disks and on fan drive hub assembly (32) being sure to align screw holes. NOTE Compressing the clutch assembly can be accomplished by temporarily using undersized screws with flat washers and nuts to draw the assembly together. 10. Assemble clutch assembly (26). a. Equally space four temporary screws (45) through friction clutch assembly (26) and secure using four flat washers (46) and nuts (47). Alternately tighten the four nuts (47) to draw the friction clutch (26) together. b. Install 12 screws (34) and torque to 150-160 inch-pounds (17-18 N•m). c. Remove four nuts (47), flat washers (46) and screws (45). d. Install remaining 4 screws (34) and torque to 150-160 inch-pounds (17-18 N•m), using torque wrench (item 124, WP 0176). e. Install new locking wire (33) (item 44, WP 0173). 11. Press new ball bearing (29) (item 295, WP 0175) in access cover (25) using an arbor press (30) (item 8, WP 0176). 2 46 47 6 25 29 30 33 45 34 32 38 39 39 38 31 WP 0129 00-13