TM-9-2815-220-24 Maintenance Manual for AVDS-1790-2CA AVDS-1790-DA and AVDS-1790-2DR Engines Download
Page 1076 of 1563
TM 9-2815-220-24 FAN DRIVE CLUTCH ASSEMBLY AND ASSOCIATED PARTS REPLACE/REPAIR 0129 00 INSPECTION (Continued) 10. Replace cover bearing (29). a. Use a new bearing (29) (item 295, WP 0175) that meets specifications (A, B) in the following table. 11. Replace hub bearing (41). a. Use a new bearing (41) (item 298, WP 0175) that meets specifications (C, D) in the following table. Location Sizes and Fits of New Parts inches (mm) Wear Limits A (outside diameter) 3.1491 (79.987) 3.1496 (79.998) None B (inside diameter) 1.3775 (34.9885) 1.3780 (35.0012) None C (outside diameter) 2.9523 (74.9884) 2.9528 (75.0011) None D (inside diameter) 1.7712 (44.9884) 1.7717 (45.0011) None 12. Measure outside diameter (E) of shaft assembly (40), using outside micrometer (item 17, WP 0176). Replace shaft assembly if not within specifications in the following table. B A D C 29 41 Location Sizes and Fits of New Parts inches (mm) Wear Limits E (outside diameter) 1.1450 (29.0830) 1.1460 (29.1084) 1.1440 (29.0576) E 40 WP 0129 00-10