TM-9-2815-220-24 Maintenance Manual for AVDS-1790-2CA AVDS-1790-DA and AVDS-1790-2DR Engines Download
Page 1035 of 1563
TM 9-2815-220-24 CYLINDER DEFLECTORS AND SHROUDS REPLACEMENT 0127 00 REMOVAL (Continued) 11. Remove oil filler tube (46). a. Remove three screws (47) with seal washers (48) and remove lower oil filler tube assembly (46). Discard gasket (49) and seal washers (48). 12. Remove flywheel end shroud plate (50). a. Remove two screws (51) with lock washers (52) and remove flywheel end cylinder head shroud plate (50). Discard lock washers. 13. Remove damper end shroud plate (53). a. Remove two screws (54) with lock washers (55) and remove damper end cylinder head shroud plate (53). Discard lock washers. 14. Remove inter-cylinder head shroud plates (56). a. Remove twenty screws (57) with lock washers (58) and remove inter-cylinder head shroud plates (56). Discard lock washers. 15. Remove oil level indicator tube (59). a. Remove three self-locking nuts (60) and remove oil level indicator tube (59). Discard self- locking nuts. b. Remove and discard gasket (61). NOTE Removal instructions for the cylinder head plates, oil filler tube and oil lever indicator tube on Model AVDS-1790 2DR are similar to above except that the oil level indicator tube is located between cylinder numbers 2L and 3L instead of 1L and 2L. 47, 48 (three places) 51, 52 54, 55 53 59 60 (three places) 46 50 57, 58 56 49 61 WP 0127 00-9