TM-9-2815-220-24 Maintenance Manual for AVDS-1790-2CA AVDS-1790-DA and AVDS-1790-2DR Engines Download

Page 1025 of 1563

TM 9-2815-220-24 THROTTLE/GOVERNOR CONTROL ROD (RIGID) ASSEMBLY REPAIR 0126 00 THIS WORK PACKAGE COVERS: Inspection and Repair INITIAL SETUP: Tools: Dial indicator (item 65, WP 0176) Drill bit, 1/8-inch (item 10, WP 0176) General mechanic’s tool kit (item 121, WP 0176) Portable electric drill (item 34, WP 0176) Personnel Required: Track Vehicle Repairer (1) 63H10 Equipment Conditions: Engine removed from vehicle and placed on a flat stationary surface Throttle linkage and associated parts removed (WP 0122 2CA, 2DA) (WP 0123 2DR) INSPECTION All parts must be inspected with care. Replace parts if damage or wear exceeds allowable limits. 1. See Work Package 0028 for General Inspection Procedures. 2. Measure the clearance (A) between ball and socket (endplay) of two rod end/bearings (1) at each end of governor control rod (2), using dial indicator (item 65, WP 0176). Replace rod end/bearing if not within the following limits. Location Sizes and Fits of New Parts inches (mm) Wear Limits A (Bearing endplay) 0.0005 (0.0127) 0.0015 (0.0381) 0.0020 (0.0508) 1 2 2 A WP 0126 00-1