TM-9-2815-220-24 Maintenance Manual for AVDS-1790-2CA AVDS-1790-DA and AVDS-1790-2DR Engines Download
Page 1017 of 1563
TM 9-2815-220-24 FUEL INJECTION PUMP LINKAGE REPLACE/REPAIR 0124 00 CLEANING 1. See Work Package 0028 for General Cleaning Procedures. INSPECTION All parts must be inspected with care. Replace parts if damage or wear exceeds allowable limits. 1. See Work Package 0028 00 for General Inspection Procedures. 2. Measure inside diameter (A) of rotating eye bracket (26), using inside micrometer (item 16, WP 0175). Replace rotating eye bracket if not within limits in the following table. 3. Measure outside diameter (B) of straight shaft (28), using outside micrometer (item 17, WP 01756). Replace straight shaft if not within limits in the following table. Location Sizes and Fits of New Parts inches (mm) Wear Limits A (inside diameter) 1.3740 (34.9996) 1.3746 (34.918) 1.3748 (34.9299) B (outside diameter) 0.6249 (15.8724) 0.6252 (15.8860) 0.6248 (15.8699) 28 A A B 26 NOTE Inspection and repair of throttle/governor control rod assembly (adjustable) (21) and throttle/governor control rod (rigid) are covered in separate work packages (WP 0125 and 0126 respectively). WP 0124 00-5