TM-9-2815-220-24 Maintenance Manual for AVDS-1790-2CA AVDS-1790-DA and AVDS-1790-2DR Engines Download
Page 1014 of 1563
TM 9-2815-220-24 FUEL INJECTION PUMP LINKAGE REPLACE/REPAIR 0124 00 REMOVAL (Continued) 3. Remove two screws (9), angle bracket (10), and spring (11) from injection pump (12). 4. Disconnect and remove rigid connecting link (1) from injection pump (12) by removing safety pin (13) and flat washer (14). 5. Disconnect and remove control rod assembly (5) from bell crank (15) by removing screw (16), self-locking nut (17), and flat washer (18). Discard self-locking nut. 6. Remove screw (19) and self-locking nut (20) from governor control rod (21) at injection pump (12). Discard self-locking nut. 7. Disconnect and remove governor control rod assembly (21) from bell crank (15) by removing screw (22) and self-locking nut (23). Discard self-locking nut. 20 18 17 21 22 23 5 16 12 13 14 1 10 12 11 15 19 9 WP 0124 00-2