TM-9-2815-220-24 Maintenance Manual for AVDS-1790-2CA AVDS-1790-DA and AVDS-1790-2DR Engines Download
Page 1001 of 1563
TM 9-2815-220-24 THROTTLE CONTROL SOLENOID ASSEMBLY AND ASSOCIATED PARTS REPLACE/REPAIR (2DR) 0123 00 INSPECTION CLEANING 1. See Work Package 0028 for General Cleaning Procedures. INSPECTION All parts must be inspected with care. Replace parts if damage or wear exceeds allowable limits. 1. See Work Package 0028 for General Inspection Procedures. A 44 2. Measure inside diameter (A) of solenoid control housing (44), using inside micrometer (item 16, WP 0176). a. Replace solenoid control housing if measurement is not between 0.8120 inch (20.62 mm) and 0.8130 inch (20.65 mm). 3. Measure outside diameter of straight shaft (16) at points (B, C, and D), using outside micrometer (item 17, WP 0176). a. Replace shaft if measurement is not within limits in the following table. Location Sizes and Fits of New Parts inches (mm) Wear Limits B (Bearing areas) 0.6249 (15.87) 0.6252 (15.88) 0.6246 (15.86) C (main shaft) 0.6245 (15.86) 0.6252 (15.88) 0.6240 (15.85) D (Fuel shutoff lever) 0.6232 (15.83) 0.6252 (15.88) 0.6217 (15.79) B B D C C B 16 WP 0123 00-7