TM-9-2815-220-24 Maintenance Manual for AVDS-1790-2CA AVDS-1790-DA and AVDS-1790-2DR Engines Download
Page 1000 of 1563
TM 9-2815-220-24 THROTTLE CONTROL SOLENOID ASSEMBLY AND ASSOCIATED PARTS REPLACE/REPAIR (2DR) 0123 00 DISASSEMBLY (Continued) WARNING Retaining rings are spring tension devices: take care when removing or installing them. They can slip or break and become airborne causing eye damage or other bodily harm. 27. Remove inner retaining ring (62) and separate solenoid control housing (44) from solenoid housing (12). Discard retaining ring. 28. Remove solenoid housing (12) with plain encased seal (63) from straight shaft (16). 29. Remove and discard plain encased seal (63) from solenoid housing (12). 30. Remove inner retaining ring (64) and flat washer (65) securing solenoid control housing (44) to straight shaft (16). Discard retaining ring. 31. Remove solenoid control housing (44) with two needle bearings (66) and plain encased seal (67), from straight shaft (16). 32. Remove plain encased seal (67) and two needle bearings (66) from solenoid control housing (44). Discard seal and bearings. 67 66 44 66 65 64 16 63 12 62 WP 0123 00-6