TM-9-2815-200-35 Maintenance Manual for AVDS-1790-2M AVDS-1790-2A and AVDS-1790-2AM Engines Download
Page 94 of 779
Remove 1. Remove two self-locking nuts and bolts (A). 2. Remove upper oil filler tube support bracket (B) from bolt (relocated oil filler tube installation only). 3. Remove turbosupercharger end shroud (C). Install 1. Position turbosupercharger end shroud (C) over turbosupercharger. 2. Position upper oil filler tube support bracket (B) on one bolt (A) relocated oil filler tube installation only). 3. Install two bolts (A) and self-locking nuts securing end shroud. Bolt with support bracket must be installed at top of shroud. Figure 4-21. Removing or installing upper oil filler tube support bracket and turbosupercharger end shroud. Disconnect 1. Disconnect turbosupercharger oil inlet hose elbow from nipple using open end wrench - 5120-448-0404 (A). 2. Remove self-locking nut and bolt (B) attaching inner shroud plate to transmission oil cooler end shroud. Connect 1. Install self-locking nut and bolt (B) securing inner shroud plate to transmission oil cooler end shroud. 2. Connect turbosupercharger oil inlet hose elbow to nipple using open end wrench - 5120-448-0404 (A). Figure 4-22. Disconnecting or connecting turbosupercharger oil inlet hose elbow from nipple using open end wrench- 5120-448-0404. 4-12