TM-9-2815-200-35 Maintenance Manual for AVDS-1790-2M AVDS-1790-2A and AVDS-1790-2AM Engines Download
Page 85 of 779
Disconnect 1. Remove adapter (A) from pump outlet. Remove connector (B) from pump inlet. 2. 3. Remove four self-locking nuts (C) and flat washers securing fuel pump to adapter. Connect 1. Install four self-locking nuts (C) and flat washers securing fuel pump to adapter. 2. Install connector (B) in pump inlet. 3. Install adapter (A) in pump outlet. Remove 1. Remove fuel pump (A) from pump adapter. 2. Remove and discard mounting gasket (B). Install 1. Position new mounting gasket (B) on studs. 2. Position fuel pump (A) on pump adapter. Note. When installing fuel pump make sure fuel pump shaft splines are properly alined with drive coupling before securing pump to adapter. Figure 4-3. Removing or installing fuel pump. Figure 4-2. Disconnecting or connecting fuel pump. Remove 1. Remove hexagon head cap screw (A) and clip securing starter jumper lead to solenoid. 2. Remove large starter jumper lead clip from terminal (B). Install 1. Position large starter jumper lead clip on terminal (B). 2. Position jumper lead on solenoid lug and secure with clip and hexagon head cap screw (A). Figure 4-4. Removing or installing starter solenoid jumper lead. 4-3