TM-9-2815-200-35 Maintenance Manual for AVDS-1790-2M AVDS-1790-2A and AVDS-1790-2AM Engines Download
Page 546 of 779
1 cylinder on both banks, when oil flows tighten bolts. (17) Install starter cables (fig. 1-2). (18) Wash all fuel and oil from engine. (19) Check all thermocouple connections. If connected correctly, should read ambient temperature; if connected incorrectly, scale reading will go to top of scale. (20) Start engine at IDLE speed (para c, below). (21) Check engine main oil pressure (para 8- 1i, (1) and (2)). (22) Piston oiler nozzle pressure should be readable. Note. Pressure will not reach the desired operating level until the engine speed has been increased (para 8-1i. (2)). (23) Exhaust manifold temperatures should register (para 8-1f). (24) Visually inspect engine for fuel and oil leaks. (25) Ready for engine test schedule (table 8- 1). Figure 8-1. Engine connection points—right front view. 8-4