TM-9-2815-200-35 Maintenance Manual for AVDS-1790-2M AVDS-1790-2A and AVDS-1790-2AM Engines Download
Page 539 of 779
a. Cylinder Head Plates, Oil Filler Tube, and Oil Level Indicator Tube. Refer to figures 5-60 through 5-51. b. Rear Shrouds. Refer to figures 5-50 through 5-48. c. Front Shrouds. Refer to figures 5-47 through 5-42. d. Throttle Linkage, Fuel Drain Tubes, Fuel / Water Separator, Secondary Fuel Filter, and Primary Fuel Filter. Refer to figures 5-41 through 5-39, 4-84, 4-85, 5-38 through 5-34. 7-15. Intake Manifold Assemblies, Cylinder Head Oil Drain Lines, and Manifold Heater Tubes, Solenoids, and Filter Refer to Table 7-11 for illustrations and assembly instructions. References are listed in the table, Table 7-11. Intake Manifold Assemblies, Cylinder Head Oil Drain Lines, and Manifold Heater Tubes, Solenoids, and Filter Component References Intake Manifold, Manifold Heater, and Turbosupercharger Para 7-15a, Fig. 5-33 Air Outlet Elbow Cylinder Head Oil Drain Tubes Para 7-15b, Figs. 5-32 through 5-28 Manifold Heater Tubes, Hoses, Fuel Check Valve, Fuel Para 7-15c, Figs. 5-27 through 5-23 Filter, Filter Bracket, and Solenoid Valves a. Intake Manifold, Manifold Heater, and elbow opening to prevent entrance of foreign Turbosupercharger. Refer to figure 5-28 and (1) objects. and (2), below. b. Cylinder Head Oil Drain Tubes. Refer to (1) After tubes for cylinder Nos. 3R and 4R figures 5-32 through 5-28. are secured, tighten tube flange nuts at cylinder c. Manifold Heater Tubes, Hoses, Fuel Check Nos. lR, 2R, 5R, and 6R at intake manifold. Valve, Fuel Filter, Filter Bracket and Solenoid (2) Cover turbosupercharger air outlet Valves. Refer to figures 5-27 through 5-23. 7-16. Oil Coolers, Beams, Cooling Fans, Shrouding, and Associated Parts Refer to Table 7-12 for illustrations and assembly instructions. References are listed in the table. Table 7-12. Oil Coolers, Beams, Cooling Fans, Shrouding and Associated Parts Component References Turbosupercharger Oil Inlet Hoee and Transmission Para 7-16a, Fig. 5-22 Shrouds Oil Coolers, Support Beams, Upper Cover Frame, and Para 7-16b, Figs. 5-21 through 5-7 Frame Support Bracket Cooling Fan Shroud and Upper Covers Para 7-16c, Figs. 4-141 through 4-136, 5-9 through 5-7, 4- 132 through 4-128 Cooling Fan Vanes and Cooling Fane Para 7-16d, Fige. 4-35, 4-34, 4-88 a. Turbosupercharger Oil Inlet Hose and c. Cooling Fan Shroud and Upper Covers. Transmission Shrouds. Refer to figure 5-22. Refer to figures 4-141 through 4-136, figures 5-9 b. Oil Coolers, Support Beams, Upper Cover through 5-7, and figures 4-132 through 4-128. Frame, and Frame Support Bracket. Refer to figures 5-21 through 5-7 and figure 7-34. 7-27