TM-9-2815-200-35 Maintenance Manual for AVDS-1790-2M AVDS-1790-2A and AVDS-1790-2AM Engines Download
Page 535 of 779
7-11. Nozzle and Holder Assemblies, Cylinder Deflectors, and Shrouds Refer to Table 7-7 for illustrations and assembly instructions. References are listed in the table. Table 7-7. Nozzle and Holder Assemblies, Cylinder Deflectors, and Shrouds Component References Nozzle and Holder Assemblies Para 7-11a, Figs. 5-103, 4-165 Shroud Plates and Cylinder Deflectors Para 7-11b, Figs. 5-102 through 5-97 a. Fuel Injector Nozzle and Holder b. Camshaft Drive Shrouds and Cylinder Assemblies. Refer to figures 5-103 and 4-165. Deflectors. Refer to figures 5-102 through 5-97. Note. When installing new gasket on nozzle Note. Removal or installation of shrouds and assembly, apply a thin coating of grease to the cylinder deflectors is the same for both left and gasket to retain gasket in position on nozzle right banks of the engine. For instructional assembly. purposes, the right bank shrouds and cylinder deflectors are illustrated. 7-12. Turbosupercharger Oil Inlet Hose and Fire Extinguisher Tube, Fuel Injection Pump Oil Inlet Hose, and Throttle Control Rods and Lever Refer to Table 7-8 for illustrations and assembly instructions. References are listed in the table. Table 7-8. Turbosupercharger Oil Inlet Hose and Fire Extinguisher Tube, Fuel Injection Pump Oil Inlet Hose, and Throttle Control Rods and Lever Component References Turbosupercharger Oil Inlet Hose and Fire Extinguisher Para 7-12a, Figs. 5-90 through 5-88 Tube Fuel Injection Pump Oil Inlet Hose Para 7-12b, Figs. 5-87 through 5-84 Throttle Control Rods and Intermediate Lever Para 7-12c, Figs. 5-83 and 5-82 a. Turbosupercharger Oil Inlet Hose and Fire b. Fuel Injection Pump Oil Inlet Hose. Refer Extinguisher Tube. Refer to figures 5-90 to figures 5-87 through 5-84. through 5-88. c. Throttle Control Rods and Intermediate Throttle Lever. Refer to figures 5-83 and 5-82. 7-13. Turbosupercharger Base, Supports, and Tie Rods, Fuel Inlet and Return Hoses, Crankcase Breather Tubes, Exhaust Pipes and Manifolds, and Fuel Injector Clamps, Supports, and Tubes Refer to Table 7-9 for illustrations and assembly instructions. References are listed in the table. Table 7-9. Turbosupercharger Base, Supports, and Tie Rods, Fuel Inlet and Return Hoses, Crankcase Breather Tubes, Exhaust Pipes and Manifolds, and fuel Injector Clamps, Supports, and Tubes Component References Turbosupercharger Base, Supports, and Tie Rods Para 7-13a, Figs. 5-81 through 5-79 Fuel Inlet and Return Hoses and Crankcase Breather Para 7-13b, Figs. 5-77 through 5-71 Tubes Exhaust Pipes and Manifolds Para 7-13c, Figs. 5-78, 5-70 through 5-68 Fuel Injector Clamps, Supports, and Tubes Para 7-13d, Figs. 5-67 through 5-64, 4-86 Fuel Injector Nozzle Fuel Return Tubes Para 7-13e, Figs. 5-63 through 5-61 7-23