TM-9-2815-200-35 Maintenance Manual for AVDS-1790-2M AVDS-1790-2A and AVDS-1790-2AM Engines Download
Page 518 of 779
Figure 7-9 1. Install eye bolt-5306-017-6143 in threaded hole provided in flywheel (A). 2. Attach suitable chain hoist eye bolt and aline dowel pin holes in flywheel with dowel pins in crankshaft flange. Position alined flywheel against flange on crankshaft. 3. Install three 9 / 16 x 1 ¾ in. bolts and alternately tighten bolts to draw flywheel toward flange on crankshaft. Bolts are used to secure transmission drive gearshaft. Note. Eye bolt - 5306-017-6143 must be removed from flywheel, before flywheel is drawn tight against flange on crankshaft, to permit flywheel to clear transmission adapter lifting eye. 4. Remove lifting eye bolt and continue to tighten three bolts until flywheel is tight against flange, then remove bolts. Figure 7-8. Installing flywheel using eye bolt-5306-017-6143. 7-6