TM-9-2815-200-35 Maintenance Manual for AVDS-1790-2M AVDS-1790-2A and AVDS-1790-2AM Engines Download
Page 506 of 779
6-62. Overhaul of Generator Air Intake and Exhaust Tubes and Associated Parts a. Disassembly. Disassemble generator air intake tube assembly following instructions which accompany figure 6-250. The generator boot exhaust tube, and associated parts were disassembled during disassembly of engine, Chapter 5. b. Cleaning, Inspection, and Repair. Refer to paragraphs 6-2 through 6-4. c. Assembly. Refer to figure 6-250. The generator boot, exhaust tube, and associated parts are assembled during engine assembly, Chapter 7. Disassemble 1. Remove six cap screws (A) and lock washers attaching screen to hose elbow. 2. Remove screen (B). 3. Remove and discard screen gasket (C). 4. Loosen two hose clamps (D) and remove hose from generator air intake tube and elbow. Remove clamps from hose. Assemble 1. Position two hose clamps (D) on hose. Position hose on elbow and generator air intake tube and tighten hose clamps. 2. Position a new screen gasket (C) on elbow. 3. Position screen (B) on elbow. 4. Install six cap screws (A) and lock washers securing screen to elbow. Figure 6-250. Disassembling or assembling generator air intake tube assembly. 6-212