TM-9-2815-200-35 Maintenance Manual for AVDS-1790-2M AVDS-1790-2A and AVDS-1790-2AM Engines Download
Page 398 of 779
Disconnect 1. Position auxiliary oil filter in arbor press and com- press retainer as shown using suitable blocks (A). 2. Remove cotter pin (B) and remove filter from arbor press. Connect 1. Position auxiliary oil filter in arbor press and com- press retainer as shown using suitable blocks (A). 2. Install cotter pin (B) and remove filter from arbor press. Figure 6-110. Disconnecting or connecting auxiliary oil filter element retainer and bushing. Remove 1. Remove bushing (A), spring, and retainer from support. 2. Remove and discard oil filter element (B). Note. Do not remove support or handle from filter cover unless inspection (para 6-38c) indicates replacement is necessary. Install 1. Position a new auxiliary oil filter element (B) on cover. 2. Position retainer, spring, and bushing (A) on support. Figure 6-111. Removing or installing auxiliary oil filter element. b. Cleaning. Refer to paragraph 6-2. Make certain all oil passages (fig. 6-112) are clear and not obstructed. 6-104