TM-9-2815-200-35 Maintenance Manual for AVDS-1790-2M AVDS-1790-2A and AVDS-1790-2AM Engines Download
Page 396 of 779
Remove 1. Remove oil temperature transmitter (A). 2. Remove oil temperature switch (B). 3. Remove two reducer bushings (C). 4. Remove pipe plug (D). 5. Remove three pipe plugs (E). Install 1. Install three pipe plugs (E). 2. Install pipe plug (D). 3. Install two reducer bushings (C). 4. Install oil temperature switch (B). 5. Install oil temperature transmitter (A). Figure 6-106. Removing or installing damper and oil filter housing switches, bushings, and pipe plugs - front view. Remove 1. Remove pipe plug (A). 2. Remove pipe plug (B) (if used on engine). 3. Remove three pipe plugs (C). 4. Remove pipe plug (D) (if used on engine). 5. Remove two pipe plugs (E). 6. Remove two pipe plugs (F). 7. Remove nipple (G) or elbow (whichever is used on engine). 8. Remove bushing (H). 9. Remove pipe plug (J) (if used on engine). Install 1. Install pipe plug(J) (if used on engine). 2. Install bushing (H). 3. Install nipple (G) or elbow (whichever is used on engine). 4. Install two pipe plugs (F). 5. Install two pipe plugs (E). 6. Install pipe plug(D) (if used on engine). 7. Install three pipe plugs (C). 8. Install pipe plug(B) (if used on engine). 9. Install pipe plug (A). Figure 6-107. Removing or installing damper and oil filter housing pipe plugs - rear view. 6-102