TM-9-2815-200-35 Maintenance Manual for AVDS-1790-2M AVDS-1790-2A and AVDS-1790-2AM Engines Download

Page 336 of 779

Section IV. OVERHAUL OF TORSIONAL VIBRATION DAMPER, FLYWHEEL, ACCESSORY DRIVE GEAR, AND TRANSMISSION DRIVE GEAR SHAFT 6-19. General dividual components follow the inspection This section covers the cleaning, inspection, procedures. Refer to the following table (table 6- and repair of the torsional vibration damper, 10) for applicable illustrations and instructions flywheel, accessory drive gear, and transmission for individual operations. drive gearshaft. Overhaul standards of the in- Table 6-10. Torsional Vibration Damper, Flywheel, Accessory Drive Gear, and Transmission Drive Gearshaft Torsional Vibration Damper Flywheel Accessory Drive Gear Transmission Drive Gearshaft Cleaning Inspection Para 6-2 Para 6-20b Table 6-11 Fig. 6-38 and 6-39 Para 6-2 Para 6-20b Table 6-11 Figs. 6-40 and 6-41 Para 6-2 Para 6-20b Table 6-11 Para 6-2 Para 6-20b Table 6-11 6-20. Cleaning and Inspection a. Cleaning. Refer to paragraph 6-2. b. Inspection. Refer to paragraph 6-3. (1) Torsional vibration damper. Inspect torsional vibration damper (6, fig. B-3) for dents or distortion of the outer surfaces. Name and warning plates must be intact (figs. 6-38 and 6- 39). Check vibration damper against limits specified in overhaul standards (table 6-11). Replace damper that is questionable or un- serviceable. Figure 6-38. 6-42 Torsional vibration damper warning plate. Repair Para 6-21b Para 6-21c Para 6-4h Para 6-21c Figs. 6-42 and 6-43 Figure 6-39. Torsional vibration damper nameplate.