TM-9-2815-200-35 Maintenance Manual for AVDS-1790-2M AVDS-1790-2A and AVDS-1790-2AM Engines Download
Page 326 of 779
Fig. B-14 Fig. No. B-14 B-14 B-14 B-14 B-14 B-14 B-14 B-14 B-14 B-14 B-14 B-14 Table 6-7. Generator and Starter Idler Gears Overhaul Standards Note. Refer to paragraph 6-3b for explanation of symbols. c. Assembly. Assemble generator idler gear following instructions which accompany figure 6-29. The starter idler gear is similar and may be assembled in the same manner. 1. Coat ball bearing (A) with engine oil Military Specification MIL-L-45199, and position bearing in bearing bore of generator idler gear. 2. Carefully press bearing into gear untill bearing seats against flange in gear. Secure bearing in gear with retaining ring (A) as shown in figure 6-28. Figure 6-29. Pressing ball bearing into generator idler gear. 6-32