TM-9-2815-200-35 Maintenance Manual for AVDS-1790-2M AVDS-1790-2A and AVDS-1790-2AM Engines Download
Page 324 of 779
Fig. B-14 Table 6-6. Generator Adapter Standard and Oversize Stud Identification Note. Refer to figure 6-1 for oversize stud identification. c. Assembly. Assemble generator drive gearshaft and adapter following instructions which accompany figures 6-26 and 6-27. 1. If ball bearings were removed from generator drive gearshift, coat ball bearing (A) with engine oil, Military Specification MIL-L-45199, and position bearing on flange of gearshaft. Press bearing on gearshaft. 2. Coat ball bearing (B) with engine oil, Military Specification MIL-L-45199, and press the bearing on the other end of the gearshaft in the same manner. Figure 6-26. Pressing ball bearings on generator drive gearshaft. 6-30