TM-9-2815-200-35 Maintenance Manual for AVDS-1790-2M AVDS-1790-2A and AVDS-1790-2AM Engines Download
Page 320 of 779
b. Cleaning, Inspection, and Repair. (1) Refer to paragraphs 6-2 through 6-4. (2) Inspect starter driven gearshaft, oil seal, and bearings against limits specified in overhaul standards (table 6-4). Replace parts not meeting hese requirements. (3) Minor damage incurred to the leading edge of the starter drive gear may be repaired by regrinding the leading surface to dimensions shown in figure 6-21. Regrind gear tooth chamfer to original configuration after rework of starter drive leading face. Figure 6-21. Starter drive gear-rework. 6-26