TM-9-2815-200-35 Maintenance Manual for AVDS-1790-2M AVDS-1790-2A and AVDS-1790-2AM Engines Download
Page 289 of 779
Install Note. The crankshaft and connecting rod sling 4910-795-7955 consists of a cable and two adapters. The adapter with the dowel pin hole attaches to the crankshaft flywheel flange. The other adapter attaches to the torsional vibration damper mounting flange. 1. Install the sling adapter (A) on flywheel flange dowel pin. 2. Secure adapter to flange with two bolts (B) used to secure flywheel. Remove 1. Remove two f lywheel bolts (B) attaching sling adapter (A) to flywheel. 2. Remove adapter from flywheel flange dowel pin. Install 1. Install the sling adapter (A) to torsional vibration damper flange (B) and secure with two vibaration damper mounting bolts. Remove 1. Remove two vibration damper mounting bolts at- taching sling adapter (A) to torsional vibration damper flange (B). Figure 5-177. Installing or removing crank - shaft and connecting rod sling- 4910-795-7955 at crankshaft torsional vibration damper flange. Figure 5-176. Installing or removing crank- shaft and connecting rod sling- 4910-795-7955 at crankshaft flywheel flange. 5-103