TM-9-2815-200-35 Maintenance Manual for AVDS-1790-2M AVDS-1790-2A and AVDS-1790-2AM Engines Download
Page 274 of 779
Remove 1. Remove two starter mounting bolts (A). 2. Remove four eelf-locking nuts (B) and flat washers attaching starter drive adapter (C) to crankcase assembly. 3. Remove adapter (C) from crankcase. 4. Remove and discard gasket (D). Install 1. Install new starter drive adapter gasket (D). 2. Position starter drive adapter (C) on crankcase assembly. 3. Install four self-locking nuts (B) and flat washers securing adapter (C) to crankcase. 4. Install two starter mounting bolts (A). Figure 5-153. Removing or installing starter drive adapter. Remove 1. Remove cotter pin (A). 2. Remove slotted nut (B) attaching starter driven gear to starter driven gearshaft. Install 1. Install slotted nut (B) securing starter driven gear to starter driven gearshaft. 2. Install cotter pin (A). Figure 5-154. Removing or installing starter driven gear attaching parts. 5-88