TM-9-2815-200-35 Maintenance Manual for AVDS-1790-2M AVDS-1790-2A and AVDS-1790-2AM Engines Download
Page 27 of 779
Figure Number 6-175 6-176 6-177 6-178 6-179 6-180 6-181 6-182 6-183 6-184 6-185 6-186 6-187 6-188 6-189 6-190 6-191 6-192 6-193 6-194 6-195 6-196 6-197 6-198 6-199a 6-199b 6-199c 6-200 6-201 6-202 6-203 6-204 6-205 6-206 6-207 6-208 6-209 6-210 6-211 6-212 6-213 6-214 Title Page Removing advance flyweight adjusting ring and injection pump drive gearshaft attaching parts (adjusting ring secured with nuts and washers). 6-146 Removing advance flyweight adjusting ring and injection pump drive gearshaft attaching parts (adjusting ring secured with bolts). 6-146 Removing injection pump drive gearshaft. 6-147 Removing advance flyweight adjusting ring and flyweight. 6-147 Removing flyweight housing. 6-148 Removing advance vane housing and vane. 6-148 Removing or installing injection pump drive gearshaft ball bearing retaining ring. 6-149 Removing injection pump drive gearshaft ball bearing. 6-149 Removing or installing automatic advance vane, housing, seals, and springs. 6-150 Removing rear bearing support using suitable gear puller. 6-150 Removing accessory drive bevel gearshaft ball bearing using suitable gear puller. 6-150 Removing advance vane housing cover, gearshaft plug, and retaining ring. 6-151 Rear fan and accessory drive housing and base studding assembly. 6-153 Determining shim thickness for rear fan driven gearshaft and rear fan drive bevel gearshaft. 6-158 Determining shim thickness for accessory drive bevel gearshaft bearing. 6-159 Pressing bevel gearshaft ball bearing on gearshaft, 6-160 Installing advance vane housing cover on accessory drive bevel gearshaft. 6-160 Pressing drive gearshaft ball bearing on drive gearshaft. 6-161 Installing advance vane housing and vane. 6-161 Installing flyweight housing. 6-162 Installing advance flyweight adjusting ring and flyweight. 6-162 Installing injection pump drive gearshaft. 6-163 Installing advance flyweight adjusting ring and injection pump drive gearshaft attaching parts (adjusting ring secured with nuts). 6-163 Installing advance flyweight adjusting ring and injection pump drive gearshaft attaching parts (adjusting ring secured with bolts). 6-164 Test stand assembly - FSN -4910-986-9873. 6-165 Test stand with coupling guard and housing cover removed. 6-166 Test stand heater control and supply tanks. 6-167 Fuel injector advance unit curve. 6-168 Fuel injection pump advance assembly adjusting ring. 6-169 Pressing driven gearshaft ball bearing on spur gearshaft. 6-170 Assembling rear fan and accessory drive housing. 6-171 Installing fuel injection pump splined drive coupler half. 6-172 Installing fuel injection pump diaphragm drive coupler half. 6-172 Installing fuel injection advance bearing cap. 6-173 Removing or installing lifting eye, intercylinder hose flanges, and hoses. 6-174 Removing or installing camshaft drive adapter and associated parts. 6-175 Disassembling or assembling camshaft drive adapter and associated parts 6-175 Removing or installing right camshaft assembly. 6-176 Disassembling or assembling camshaft assembly. 6-176 Removing or installing right camshaft end plate. 6-177 Disassembling or assembling Improvised camshaft trueing right camshaft cover plate. 6-178 device. 6-179 xxi