TM-9-2815-200-35 Maintenance Manual for AVDS-1790-2M AVDS-1790-2A and AVDS-1790-2AM Engines Download
Page 261 of 779
Remove Install 1. Cut locking wire (A) securing eight bolts. 1. Install eight bolts (B) and flat washers securing oil 2. Remove eight bolts (B) and flat washers attaching oil pan to rear of crankcase assembly. pan to rear of crankcase assembly. 2. Install locking wire (A) securing bolts. Figure 5-135. Removing or installing oil pan rear bolts. Remove 2. Remove 27 of the 28 self-locking nuts (B) and flat 1. Cut locking wire and remove 12 drilled head bolts (A) washers attaching oil pan to each side of crankcase and flat washers attaching oil pan to crankshaft damper assembly. and oil filter housing. install 1. Install 27 self-locking nuts (B) and flat washers Note. One self-locking nut (B) and flat washer securing oil pan to each side of crankcase assembly. must remain on each side of oil pan until oil pan 2. Install 12 drilled head bolts (A) and flat washers is removed to prevent oil pan from falling and securing oil pan to crankshaft damper and oil filter being damaged. housing. Install locking wire securing bolts. Figure 5-136. Removing or installing oil pan bolts-right front view. 5-75