TM-9-2815-200-35 Maintenance Manual for AVDS-1790-2M AVDS-1790-2A and AVDS-1790-2AM Engines Download
Page 245 of 779
Remove 1. Remove four plate nuts (A) from lower right rear engine shroud. 2. Remove two machine screws (B) attaching cylinder base shroud to lower right rear engine shroud. Remove base shroud. 3. Remove lower right rear engine Shroud (C). 4. Remove machine screw (D), lock washer, and spring clip from crankcase. install 1. Position spring clip on lower right rear of crankcase and install machine screw (D) and lock washer. 2. Position lower right rear engine shroud (C) on engine and engage clip. 3. Position cylinder base shroud on engine shroud (C). Install two machine screws (B) securing base shroud to engine shroud. 4. Install four plate nuts (A) on engine shroud. 1. Remove five self-locking nuts (A) and flat washers from hooks. 2. Remove five intercylinder head deflectors (B). Install 1. Position five intercylinder head deflectors (B) between cylinders. 2. Install five self-locking nuts (A) and flat washers on hooks securing deflectors. Figure 5-100. Removing or installing inter- cylinder head deflectors-right side. Figure 5-99. Removing or installing lower right rear engine shroud-side view. 5-59