TM-9-2815-200-35 Maintenance Manual for AVDS-1790-2M AVDS-1790-2A and AVDS-1790-2AM Engines Download
Page 235 of 779
Remove support is removed or installed in the same 1. Remove cotter pin, slotted nut (A), and bolt attaching manner. turbosupercharger mounting base support (B) to Install transmission adapter. 2. Remove support. 1. Position turbosupercharger mounting base support (B) on transmission adapter. Note. Left turbosupercharger mounting base 2. Install bolt, slotted nut (A) and cotter pin securing support. Figure 5-81. Removing or installing right turbo supercharger mounting base support. 5-9. Throttle Control Rods and Lever, Refer to Table 5-6 Fuel Injection Pump Oil Inlet Hose, disassembly instructions. Turbosupercharger Oil Inlet Hose and listed in the table. Fire Extinguisher Tube, and Fuel ln- jection Pump Table 5-6. Throttle Control Rods and Lever, Fuel Injection Pump Oil Inlet Hose, Turbosupercharger Oil Inlet Hose and Fire Extinguisher Tube, and Fuel Injection Pump for illustrations and Figure references are Component Figure Reference Throttle Control Rods and Intermediate Throttle Lever 5-82 through 5-84 Fuel Injection Pump Oil Inlet Hose 5-85 Through 5-87 Turbosupercharger Oil Inlet Hose and Fire Extinguisher 5-88 through 5-90 Tube Fuel Injection Pump 5-91 through 5-96 5-49