TM-9-2815-200-35 Maintenance Manual for AVDS-1790-2M AVDS-1790-2A and AVDS-1790-2AM Engines Download
Page 223 of 779
Remove 1. Remove eight self-locking nuts (A) and bolts. Remove four plates and eight tube clamps from four left tube clamp supports. 2. Remove four self-locking nuts (B) and bolts. Remove two plates and four tube clamps from double tube clamp support. 3. Remove four self-locking nuts (C) and bolts. Remove two plates and four tube clamps from double angle and single angle brackets. 4. Remove four self-locking nuts (D) and bolts. Remove two plates and four tube clamps from two right tube clamp supports. Install Note. Some engines were provided with four additional clamps to minimize the vibration of the fuel injection tube. When overhauling engines, install tube clamping to the current clamping arrangement, as described in in- structions which accompany figure 5-65 and to dimensions shown in figures 4-41 and 4-42. Figure 5-64. Removing fuel injector clamps-engines without additional clamps. 5-37