TM-9-2815-200-35 Maintenance Manual for AVDS-1790-2M AVDS-1790-2A and AVDS-1790-2AM Engines Download
Page 215 of 779
Remove 1. Remove three assembled washer bolts (A) and seal washers and remove oil filler tube and cap as a unit. Discard seal washers. 2. Remove and discard oil filler tube gasket (B). 3. Remove three self-locking nuts (C) and remove oil level indicator tube and cap as a unit. 4. Remove and discard oil level indicator tube gasket (D). Install 1. Install a new oil level indicator tube gasket (D) on oil pan, 2. Position oil level indicator tube and cap as a unit on oil pan. Install three self-locking nuts (C) securing tube. 3. Install a new oil filler tube gasket (B) on oil pan. 4. Position oil filler tube and cap as a unit on oil pan. Install three assembled washer bolts (A) and new seal washers securing tube. Figure 5-53. Removing or installing oil filler and oil level indicator tubes-engines Remove 1. Remove two machine screws (A) and lock washers and remove cylinder head plate at oil filler tube. 2. Remove two machine screws (B) and lock washers and remove cylinder head plate at oil level indicator tube. Install 1. Position cylinder head plate at oil level indicator tube position. Install two machine screws (B) and lock washers securing plate. 2. Position cylinder head plate at oil filler tube position. Install two machine screws (A) and lock washers securing plate. Figure 5-54. Removing or installing cylinder head plates at oil filler and oil level indicator tubes-engines without splash pan installation. with one piece oil filler tube. 5-29