TM-9-2815-200-35 Maintenance Manual for AVDS-1790-2M AVDS-1790-2A and AVDS-1790-2AM Engines Download
Page 211 of 779
Remove 1. Remove three machine screws (A) and remove left front shroud. 2. Remove eight plate nuts (B) from shroud. Note. Remove or install cylinder baffle from cylinder No. 1L after left front shroud is removed and in the same manner as cylinder baffle No. lR was removed (fig. 5-44). Cylinder baffle for cylinder No. 6R is identical and in- terchangeable with baffle for cylinder No. 1L and is also removed or installed in the same manner. Install 1. Install eight plate nuts (B) on left front shroud. 2. Position left front shroud on engine and install three machine screws (A). Figure 5-47. Removing or installing left front shroud. Remove 1. Remove two machine screws (A). 2. Remove three machine screws (B) and lock washers attaching top filler plate to crankshaft damper and oil filter housing. Remove top filler plate. 3. Remove three machine screws (C) and lock washers attaching side filler plate to housing. 4. Remove three machine screws (D) attaching side filler plate to left front shroud and remove filler plate. Install 1. Position side filler plate on left front shroud and install three machine screws (D) securing plate to shroud. 2. Install three machine screws (C) and lock washers securing side filler plate to crankshaft damper and oil filter housing. 3. Position top filler plate on housing. Install three machine screws (B) and lock washers securing plate to housing. 4. Install two machine screws (A). Figure 5-46. Removing or installing top and side filler plates-cylinder No. 1L. 5-25